Home audio products
HOME AUDIO

Breakaway
Audio Enhancer

Dramatically improves the audio quality
for your whole computer

MORE

 
 
Broadcast audio products
BROADCAST AUDIO

Breakaway
Broadcast Processor

State-of-the-art audio processing
for broadcasters

MORE

featurelive
LIVE AUDIO

Breakaway Live

High-end processing for studios and live use

MORE


Breakaway DJ
Stellar sound quality for DJ's

MORE

FM Mode Calibration

FM Mode Calibration

Small FM transmitters usually do not have proper high frequency response, as they are designed to be directly connected to standard audio equipment, without using an FM audio processor. This is a compromise to prevent overmodulation, and while it works reasonably well, it yields dull sound.

FM audio processors traditionally cost thousands of dollars, and have been completely range of small broadcasters -- until now!

Using the FM Mode in Breakaway Audio Enhancer, there's no more need to compromise.

 

Using FM Mode alone will make a big improvement to your FM transmitter sound, but if you calibrate it properly, it can truly sound excellent.

These are step by step instructions to calibrate.

Start by connecting the line output of a good radio (preferably the recording output of a receiver) to the line input of a computer. Any radio will work, including one with only a headphone output, provided you turn off bass boost, and set any EQ or other tone controls in the middle.

Tune in a commercial station. Don't choose the loudest station in town -- choose an average loudness station that sounds good.

Start the FM Mode Calibration Tool and make sure you are seeing the station on the meters. Make sure you're not overloading the input.

 

Adjust the Gain Slider in the calibration tool, until it looks roughly like the image below.

 

Start Breakaway, and connect the output of the computer to the input of your transmitter.

Right-click on the meters, and choose FM Mode in the menu that comes up. 

 

Right-click again, and choose FM Options. This brings up the FM Options window.

 

Choose Tone gen: 400hz

 

Tune the radio to your station. You will be able to find it easily as it's playing a tone. Then, adjust the volume until the tone is rightly the same level on the graph as the commercial station was.

There could be as many as three volume controls at play. There's Breakaway's volume control, there's the Sound Card output volume (accessible in the Volume Control in Windows), and there could be an input level control on your Transmitter.

Please make sure not to turn Breakaway's volume control above -3.0dB, to keep some headroom. 

 

 

After the test tone is the correct level on the graph, switch to Tone gen: Sweep (Tuner) in Breakaway.

 

Turn up the Gain so that you can see the sweep properly.

 

The sweep should ideally look flat. It should not taper off, or be concave or convex.  We'll need to adjust the EQ in Breakaway FM mode.

If the shape is nice and flat like below, we're done! The result should sound much brighter and crisper than before. Now that there's a proper FM audio processor in front of the transmitter, there's no need to play it safe with the audio anymore -- loud, powerful, broadcast quality sound can now be had from almost any transmitter.

 Enjoy!

 

Breakaway Audio Enhancer v1.2 authorization without internet connection

Step-by-step instructions on how to authorize Breakaway Audio Enhancer on a computer without internet access:

1) Right-click on the Breakaway icon on the taskbar

 right-click on the Breakaway icon on the taskbar

 

2) Select "About Breakaway"

select about Breakway from the menu

 

3) Left-Click on the "Validate" button

press the validate button

 

 

4) Enter the authorization code exactly as shown in the authorization email you received. The copy and paste technique works best.

Left-click on the "Register" button.  

 paste the authorization code

 

 5) Left-click on "Restart"

press the restart button

 

6) When Breakaway restarts, the following message will breifly be displayed:

please wait while activating your breakaway license

 

7) When Breakaway is not able to access the interet, the following message will be displayed.  Press the "Next" button to authorize without internet access.

unable to open activation URL, press next to manually authorize

 

 

8) Press the "Copy" button.

Press the copy button.  Then paste URL into web browser.

 

9) The authorization request URL will be copied into the computer's clipboard. Paste the authorization request URL into a text file (e.g. notepad works fine). Then you will need to transfer the text file (containing the authorization request URL) to another computer that has internet access.  DO NOT close the activation wizard on the computer (without internet access) until you receive and enter the authorization code. The activation wizard will generate a different URL each time it is launched, so there is no way around this inconvenience.

 

10) On another computer, that has internet access, paste the URL into a web browser. Wait until the authorization code is displayed in the web browser window.  Copy the authorization code and paste into a text file.  Transfer the text file to the computer without internet access.

copy authorization code from web browser

 

 

11) Paste the authorization code in the field marked "After visiting the URL, paste the response below".  Then press "Next".

paste code from web browser into authorization field

 

12) The following message will be displayed.  Then press "Finish".

authorization successful

 

 

 

 

Breakaway Audio Enhancer v1.2 Authorization with internet

Step-by-step instructions on how to authorize Breakaway Audio Enhancer on a computer with internet access:

1) Right-click on the Breakaway icon on the taskbar

 right-click on the Breakaway icon on the taskbar

 

2) Select "About Breakaway"

select about Breakway from the menu

 

3) Left-Click on the "Validate" button

press the validate button

 

 

4) Copy the authorization code received in your email.  High-light code, then right-click on high-lighted are and select copy:

copy authorization code from email

Position the cursor over the "Code" field, on the About Breakaway window, and right-click. Select "Paste".

Left-click on the "Register" button.  

 paste the authorization code

 

 5) Left-click on "Restart"

press the restart button

 

6) When Breakaway restarts it will connect to the internet to authorize.

If the authorization is successful, you will see the following message.

Activation Successful 

 

7) Press the "Finish" button the conclude the authorization procedure.